Horizontal Thruster Motor Mount Removal Procedures

Time required for this step: Approximately 5 Minutes (10 Minutes for both sides)

Tools required for this step:

• #2 Phillips Head Screw Driver

Parts involved in this step:

MAR-004 Horizontal Thruster Motor Mount

Steps

Note: The following step-by-step instructions apply to one side. Repeat these steps on both sides if you plan to remove both Horizontal Motor Mounts.

1. Unscrew the four 3 X 6 mm Phillips head screws that hold the horizontal motor mount to the horizontal motor assembly.

2. Slide the horizontal motor mount off of the horizontal motor assembly.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view