Orient the vertical thruster motor shield at the shaft end of the vertical thruster motor assembly with the retaining screw end of the shield away from the motor assembly.
Slide the vertical thruster motor shield over the vertical motor wires and onto the vertical thruster motor assembly until the shield is over the motor as far as it can go. The set screws should be aligned with the base of the gearbox.
Tighten the two vertical thruster motor shield 4-40 X 1/8 inch set screws.
If the video above doesn't play in your browser, click this play icon to try an alternate method: ,
or click this manual reference icon to view an exploded view
