Dome Retaining Rings and Main Hull Rods Removal Procedures

Time required for this step: Approximately 5 Minutes

Tools required for this step:

• 5/16 Inch Open End Wrench or Nut Driver
• 5/16 Inch Open End Wrench or Nut Driver (Additional)

Parts involved in this step:

MHU-002-GY-KIT Dome Retaining Rings and Main Hull Rods

Steps

1. Unscrew the 6-32 acorn nuts from the main hull rods at the rear of the ROV.

2. Unscrew the 6-32 Nylock nuts from the main hull rods at the rear of the ROV.

3. Remove the rear dome retaining ring from the main hull rods. Make sure to keep track of the plastic inserts.

4. Remove the front dome retaining ring and main hull rods from the front of the main hull.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view