Comprehensive Parts List for:

LED Light Printed Circuit Board

The following list is provided to identify all of the parts that will be involved in the process of removing and replacing the LED Light Printed Circuit Board. Replacing these parts with new parts is not required unless it is determined that a part is not suitable for reuse. VideoRay recommends that new O-rings be used whenever possible.

LT-001-4 Light Dome

QuantityPart NumberPart Description
2LT-001-4Light Part Dome Industrial
2OR-135O-Ring #135

VR-PRO4-05-0001 LED Light Module Assembly

QuantityPart NumberPart Description
2VR-PRO4-05-0001Light Assembly LED Module (Pro 4)

MAR-002-ASSM LED Light Reflector Set

QuantityPart NumberPart Description
4MAR-002-ASSMLight Assembly LED Reflector (Pro 4)
891249A058Screw #2-56 x 1/2" Pan Head Phillips SS Black

VR-PRO4-05-0002 LED Light Printed Circuit Board

QuantityPart NumberPart Description
2VR-PRO4-05-0002Circuit Board ROV LED Lights (Pro 4 front)
491249A050Screw #2-56 x 1/4" Pan Head Phillips SS Black
2WM1845-NDConnector 2 x 1 Molex Micro-Fit Female
4538-43030-0010Crimp Pin 26-30 AWG Molex Micro-Fit Female

This list includes quantities for both sides where applicable. With the exception of the horizontal thruster propellers, parts can be interchanged betweeen left (port) and right (starboard) sides.

VideoRay Documentation Only

[ Help us improve this document ]
Pro 4 Maintenance Manual, Version: Advanced 1.00.00
Copyright © 2015, VideoRay LLC - The Global Leader in Micro-ROV Technology