Rear Dome Removal Procedures

Time required for this step: Approximately 2 Minutes

Tools required for this step:

Wooden Dowel Rod 3/8" x 12"

Parts involved in this step:

MHU-004(r) Rear Dome

Quantity	Part Number	Part Description
1	MHU-004(r)	Main Dome
1	OR-152	O-Ring #152

Steps

Using the tabs on the side of the rear dome, gently pull the dome from the rear hull ring.
If you plan to replace the O-ring, remove it by pinching it around the rear hull ring to create a slack section that can be grabbed.

If the video above doesn't play in your browser, click this play icon to try an alternate method: , or click this manual reference icon to view an exploded view

Tips

If the rear dome is stuck, you can try to force it off using a wooden dowel against the back side of one of the tabs on the dome and tapping on the dowel.

Sometimes the rear hull ring assembly will come off while trying to remove the rear dome. If this happens, remove the rear dome after the rear hull ring assembly is removed. Follow the instructions for replacing the rear hull ring assembly before replacing the rear dome.

[ Help us improve this document ]