Camera Sub-menu: WHITE BALANCE
|
MENU ITEM
|
DESCRIPTION
|
WB MODE
White Balance Mode
|
Set the camera White Balance Mode. White Balance ensures that white areas of an image are not tinted and provides natural color images.
- ATW - Auto White Balance in the range of 2,500K to 11,000K.
- PUSH - Auto White Balance with a broader range than the ATW mode.
- PUSH LOCK - Allow the user to set the White Balance (see Push Auto below)
- USER - Set Red and Blue levels manually
|
|
RED CONT
|
Set the amount of red gain. Range = 0 to 255. Available only when White Balance Mode is set to USER.
|
|
BLUE CONT
|
Set the amount of blue gain. Range = 0 to 255. Available only when White Balance Mode is set to USER.
|
|
PUSH AUTO
|
Set the White Balance based on the current scene and lighting. For best results, the scene should be white or contain as much white as possible. Available only when White Balance Mode is set to Push Lock.
|
|
INITIAL
|
Reset this sub-menu to the factory default state. VideoRay uses optimized camera menu settings and the factory default settings should not be used. If you want to reset this sub-menu to the VideoRay optimized settings, use the recommended settings described for this sub-menu.
|
|
RETURN
|
Return to the main menu.
|
|
